Climate chambers

Filter and sort 3 products
Sort by

A climate chamber is environmental simulation equipment designed to reproduce precise temperature and humidity conditions in order to subject samples, materials, or components to reproducible aging, stability, or characterization tests.


At Rewake, each climate chamber is refurbished, inspected, and tested by our technicians before shipment. You receive operational, guaranteed professional equipment, ready to be integrated into your laboratory or production line without delay.


This collection is aimed at pharmaceutical laboratories, research teams, electronics and aeronautics manufacturers, and any professional needing to simulate controlled climatic conditions at a controlled cost.

En savoir plus

What is a laboratory climatic chamber?

A climatic chamber is equipment capable of simulating precise and stable environmental conditions: temperature, relative humidity, thermal cycles, or a combination of these parameters. It allows samples to be subjected to reproducible tests in a totally controlled environment, regardless of external ambient conditions.

Its principle is based on the simultaneous regulation of temperature and humidity, managed by a microprocessor that controls the heating elements, the refrigeration system, and the humidifier. Internal uniformity is a key criterion: it ensures that all samples placed in the chamber are subjected to the same conditions, regardless of their position.

The climatic chamber differs from an oven, which only controls temperature in dry heat, and an incubator, whose temperature range is limited. The temperature range of a climatic chamber generally extends from negative values to over 100°C, with precise control of the relative humidity rate.

The different types of climatic chambers available

The Rewake collection covers the main families of climatic chambers used in laboratories and industry. Each type meets specific application, volume, and stress level constraints. Identifying the right model from the start avoids selection errors and adaptation costs.

The available useful volumes range from a few dozen liters for benchtop chambers to several hundred liters for large-volume climatic chambers. The type of regulation, the temperature range, and the available options vary significantly from one family to another.

Temperature and humidity climatic chamber

The temperature and humidity chamber is the reference model in the laboratory. It simultaneously regulates temperature and relative humidity, with cycle-based programming and an integrated data logger to ensure test traceability. Temperature and humidity probes are integrated and factory-calibrated.

This type of equipment is essential for stability tests in the pharmaceutical industry, accelerated aging of electronic components, and the characterization of materials sensitive to climatic variations. The useful volume in liters and the hygrometric precision are the two priority criteria to verify according to the intended application.

Thermal shock chamber

The thermal shock chamber subjects samples to rapid transitions between two extreme temperature zones, hot and cold. This process tests the mechanical resistance and reliability of materials and components against repeated expansion and contraction.

It is widely used in aeronautics, electronics, and for composite materials. It has two distinct compartments and programmable cycles. The rapid temperature variation between the two zones is the central technical parameter that determines the severity of the tests that can be performed.

Salt spray chamber and large-volume climatic chamber

The salt spray chamber is designed for corrosion tests on metal parts, coatings, and surface treatments. It reproduces an aggressive saline environment to evaluate the resistance of materials over time, in accordance with current industrial standards.

Large-volume climatic chambers allow for the testing of bulky parts or a large number of samples simultaneously. Their installation requires a demineralized water supply and adapted ventilation. They are used in the automotive industry, aeronautics, and for endurance testing on complete systems.

Technical criteria for choosing the right climatic chamber

The first criterion is the useful volume, expressed in liters. It determines the size and number of samples that can be tested simultaneously. An undersized volume limits test productivity, while an oversized model generates unnecessary energy costs.

The temperature range defines the extreme conditions that can be simulated. It must cover all values required by the team's test protocols. Relative humidity control must be checked in parallel: some models only manage humidity over a portion of their temperature range.

Thermal and hygrometric uniformity inside the chamber determines the validity of the results. A PID-type controller ensures optimal stability of the setpoints and limits oscillations around target values. The presence of a data logger and multiple probes is essential for laboratories subject to traceability requirements.

The thermal insulation of the walls directly influences energy consumption and the stability of internal conditions. Compliance with applicable standards, the ease of cleaning the shelves and the interior, as well as the availability of spare parts are criteria not to be overlooked for equipment intended for intensive use.

Rewake reconditioned climatic chambers: our refurbishment process

Each climatic chamber integrated into the Rewake collection follows a structured refurbishment protocol, carried out by technicians specializing in laboratory equipment. The objective is to restore performance that complies with original specifications, at a reduced acquisition cost.

The first step is a complete inspection of the interior and insulating walls. The state of thermal insulation, door tightness, and the resistance of the internal stainless steel walls are systematically checked. Any detected degradation results in the replacement of the relevant component before testing.

The compressor and refrigeration system are then checked: refrigerant pressure, condition of the condenser and evaporator, and absence of leaks. Temperature and humidity probes are tested over the entire operating range and recalibrated if necessary.

The humidifier, ventilation system, and controller are checked under real conditions. Complete cycles of temperature and humidity ramp-up and ramp-down are performed to validate the chamber's stability and uniformity. Each piece of equipment shipped is accompanied by a warranty and complete traceability.

For which uses and sectors?

Climatic chambers in the Rewake collection cover a wide spectrum of professional applications. In the pharmaceutical industry, they are used for stability tests of drugs and active ingredients, according to strict protocols that impose precise conditions of temperature and relative humidity over long durations.

In electronics and aeronautics, they are used to perform accelerated aging tests and thermal shocks on components, electronic boards, and embedded systems. These tests make it possible to detect premature failures before equipment is commissioned.

Metrology and research laboratories use climatic chambers for the calibration of probes and sensors, as well as for thermal and hygrometric mapping of controlled environments. Traceability of recorded data is a non-negotiable criterion here.

The automotive industry and manufacturers of composite materials use this equipment for endurance testing on parts and assemblies subjected to repeated thermal cycles. The Rewake range makes it possible to cover these varied needs with equipment available in stock, without long supply lead times.

Why choose a reconditioned climatic chamber?

The main argument is economic. A reconditioned climatic chamber is available at a price significantly lower than that of equivalent new equipment. For laboratories managing tight budgets or wishing to increase test stations, it is a concrete lever for cost reduction without compromising on precision or reliability.

The major brands in the sector are represented in the Rewake collection. Accessing chambers known for their robustness and performance, at a controlled cost, is a direct advantage for teams with precise technical requirements and standardized test protocols.

Delivery times are generally shorter than for new orders, as the equipment is available in stock and ready to ship. An urgent replacement or a rapid expansion of test capacities thus becomes possible without immobilizing a significant investment budget.

Environmentally, extending the life of a climatic chamber reduces manufacturing needs and limits industrial waste. Refurbishment is part of an approach to energy efficiency and concrete responsibility, without harming the operational quality of the delivered equipment.

Request a quote for a laboratory climatic chamber

Climatic chambers make it possible to reproduce controlled temperature and humidity conditions. Rewake offers reconditioned equipment for research and industry. Request your quote for a laboratory climatic chamber according to your operating ranges.

FAQ — Reconditioned climatic chamber

What is the difference between a climatic chamber and a laboratory oven?

An oven only controls temperature in dry heat, without humidity regulation. A climatic chamber simultaneously regulates temperature and relative humidity, which makes it essential for tests requiring precise hygrometric control. The two pieces of equipment are not interchangeable: an oven cannot simulate combined climatic conditions, regardless of its temperature range.

How to choose the useful volume of your climatic chamber?

The useful volume depends on the size and number of samples to be tested simultaneously. Standard laboratory chambers generally cover volumes from 30 to 600 liters. For bulky parts or large-quantity tests, large-volume climatic chambers are better suited. In case of doubt regarding sizing, the Rewake team is available to guide you toward the model best suited to your protocols.

Are Rewake reconditioned climatic chambers compliant with current standards?

Each chamber is tested for its actual performance before shipment: effective temperature range, thermal and hygrometric uniformity, and setpoint stability. Calibration is performed, and measured values are compared with the original specifications. Test reports are available on request for laboratories that are accredited or subject to strict traceability requirements.

Can accelerated aging tests be performed with a reconditioned climatic chamber?

Yes, provided that the chamber is properly calibrated and that its thermal and hygrometric uniformity performance is verified and documented. Rewake systematically tests these parameters before shipment. The pharmaceutical, electronics, and composite materials sectors are among the regular users of this type of testing on reconditioned equipment.

What maintenance for a laboratory climatic chamber?

Regular maintenance covers five points: cleaning the internal interior and shelves, checking and replacing temperature and humidity probes, checking the compressor and refrigeration circuit, renewing demineralized water for the humidifier, and periodic calibration of the regulation. Rigorous maintenance is essential to maintain test precision and guarantee the validity of the results over time.

Our commitments

Equipment checked

All the equipment we sell has been reconditioned and checked by our teams.

Delivery and installation

We offer delivery throughout mainland France as well as on-site installation if necessary.

Guarantee

All equipment is guaranteed for at least 6 months after purchase, or even longer depending on conditions.